QUALITY INSPECTOR SPECIALIST

Job details We are looking for a and experienced Quality Inspector Specialist to Inspect product , able to read and understand industrial / aerospace specifications including ISO9001 and AS9100, military specifications, industry specifications, and manufacturing instructions. Will per performing inspections and record inspection data associated with First Piece Inspections, First Article Inspections, Receiving Inspections, Final Inspections, and Work-in-Process Inspections. Must be able to Develop and implement programs for use with CMM running Calypso software. ...
1st shift 7:00AM - 3:30PM (Monday - Friday)
2nd shift 3:30PM - 12AM (Monday - Friday)

Responsibilities:
?Inspect product using standard inspection tools (calipers, micrometers, height gage, etc.).
?Read and understand industrial / aerospace specifications including ISO9001 and AS9100, military specifications, industry specifications, and manufacturing instructions.
?Perform inspections and record inspection data associated with First Piece Inspections, First Article Inspections, Receiving Inspections, Final Inspections, and Work-in-Process Inspections.
?Complete accurate first article packages for submission to Engineering and Quality personnel.
?Ensure nonconforming material is properly segregated according to procedures and controlled until properly dispositioned.
?Assist in maintaining inspection equipment to ensure calibration is performed in a timely manner, and that lost, damaged or out-of-service equipment is properly accounted for and controlled according to procedure.
?Perform all tasks in a safe and reasonable manner per company Employee Handbook.
?Maintain a clean safe work environment and contribute to companies 6S program and Lean Manufacturing concepts.
?Complete documentation accurately and scan on/off shop orders correctly.
?Utilize and understand operation process sheets and inspect parts per character control sheets.
?Notify Supervisor immediately should there be damage, defect, or inability to proceed efficiently.
?Set up and operate CMM and inspection arm using pre-existing inspection programs.
?Verify and validate CMM and inspection arm programs including correlation using secondary inspection methods.
?Develop and implement programs for use with CMM running Calypso software and inspection arm.
?Assist junior inspection personnel in inspection methodology.
?Perform complex layout inspections (datum setups, multiple characteristics, and mathematical calculations) as required.
?Address manufacturing / inspection challenges with shop personnel and work with Engineering to implement solutions.
?Qualify and become certified for customer designated quality representative (DQR) status as required.
?Perform other related duties as required.

Working hours: Various Shifts Available

Skills:
AA/AS degree preferred

Education:
High School

Experience:
4-7 years

Qualifications:
MUST BE US citizens
MUST HAVE Calypso CMM experience
Minimum technical school / 3 years CMM programming experience and 4 years of work experience in Quality field OR 10 years work experience in Quality field

Written and verbal communication skills required.
Ability to work independently or in a team environment.
Ability to stay focused, adapt to change positively or negatively, and close attention to detail.
Ability to read and follow company processes, policies, and procedures.
Must have knowledge and understanding of basic math and computer functions.
Ability to multitask, work effectively and efficiently to shop order standards.
Must understand engineering drawings, schematic diagrams, or formulas and confers with management or engineering staff to determine quality and reliability standards.
Must be willing to train co-workers in aspects of the shop.
Must be able to communicate and read English proficiently.


If you have the skills and experience we are looking for , APPLY TODAY at Show lessShow more We are looking for a and experienced Quality Inspector Specialist to Inspect product , able to read and understand industrial / aerospace specifications including ISO9001 and AS9100, military specifications, industry specifications, and manufacturing instructions. Will per performing inspections and record inspection data associated with First Piece Inspections, First Article Inspections, Receiving Inspections, Final Inspections, and Work-in-Process Inspections. Must be able to Develop and implement programs for use with CMM running Calypso software.

1st shift 7:00AM - 3:30PM (Monday - Friday)
2nd shift 3:30PM - 12AM (Monday - Friday)

Responsibilities:
?Inspect product using standard inspection tools (calipers, micrometers, height gage, etc.).
?Read and understand industrial / aerospace specifications including ISO9001 and AS9100, military specifications, industry specifications, and manufacturing instructions.
?Perform inspections and record inspection data associated with First Piece Inspections, First Article Inspections, Receiving Inspections, Final Inspections, and Work-in-Process Inspections.
?Complete accurate first article packages for submission to Engineering and Quality personnel. ... ?Ensure nonconforming material is properly segregated according to procedures and controlled until properly dispositioned.
?Assist in maintaining inspection equipment to ensure calibration is performed in a timely manner, and that lost, damaged or out-of-service equipment is properly accounted for and controlled according to procedure.
?Perform all tasks in a safe and reasonable manner per company Employee Handbook.
?Maintain a clean safe work environment and contribute to companies 6S program and Lean Manufacturing concepts.
?Complete documentation accurately and scan on/off shop orders correctly.
?Utilize and understand operation process sheets and inspect parts per character control sheets.
?Notify Supervisor immediately should there be damage, defect, or inability to proceed efficiently.
?Set up and operate CMM and inspection arm using pre-existing inspection programs.
?Verify and validate CMM and inspection arm programs including correlation using secondary inspection methods.
?Develop and implement programs for use with CMM running Calypso software and inspection arm.
?Assist junior inspection personnel in inspection methodology.
?Perform complex layout inspections (datum setups, multiple characteristics, and mathematical calculations) as required.
?Address manufacturing / inspection challenges with shop personnel and work with Engineering to implement solutions.
?Qualify and become certified for customer designated quality representative (DQR) status as required.
?Perform other related duties as required.

Working hours: Various Shifts Available

Skills:
AA/AS degree preferred

Education:
High School

Experience:
4-7 years

Qualifications:
MUST BE US citizens
MUST HAVE Calypso CMM experience
Minimum technical school / 3 years CMM programming experience and 4 years of work experience in Quality field OR 10 years work experience in Quality field

Written and verbal communication skills required.
Ability to work independently or in a team environment.
Ability to stay focused, adapt to change positively or negatively, and close attention to detail.
Ability to read and follow company processes, policies, and procedures.
Must have knowledge and understanding of basic math and computer functions.
Ability to multitask, work effectively and efficiently to shop order standards.
Must understand engineering drawings, schematic diagrams, or formulas and confers with management or engineering staff to determine quality and reliability standards.
Must be willing to train co-workers in aspects of the shop.
Must be able to communicate and read English proficiently.


If you have the skills and experience we are looking for , APPLY TODAY at Show lessShow more

• key responsibilities

  ?Inspect product using standard inspection tools (calipers, micrometers, height gage, etc.).?Read and understand industrial / aerospace specifications including ISO9001 and AS9100, military specifications, industry specifications, and manufacturing instructions.?Perform inspections and record inspection data associated with First Piece Inspections, First Article Inspections, Receiving Inspections, Final Inspections, and Work-in-Process Inspections.?Complete accurate first article packages for submission to Engineering and Quality personnel.?Ensure nonconforming material is properly segregated according to procedures and controlled until properly dispositioned.?Assist in maintaining inspection equipment to ensure calibration is performed in a timely manner, and that lost, damaged or out-of-service equipment is properly accounted for and controlled according to procedure.?Perform all tasks in a safe and reasonable manner per company Employee Handbook.?Maintain a clean safe work environment and contribute to companies 6S program and Lean Manufacturing concepts.?Complete documentation accurately and scan on/off shop orders correctly.?Utilize and understand operation process sheets and inspect parts per character control sheets.?Notify Supervisor immediately should there be damage, defect, or inability to proceed efficiently. ?Set up and operate CMM and inspection arm using pre-existing inspection programs. ?Verify and validate CMM and inspection arm programs including correlation using secondary inspection methods.?Develop and implement programs for use with CMM running Calypso software and inspection arm.?Assist junior inspection personnel in inspection methodology.?Perform complex layout inspections (datum setups, multiple characteristics, and mathematical calculations) as required.?Address manufacturing / inspection challenges with shop personnel and work with Engineering to implement solutions.?Qualify and become certified for customer designated quality representative (DQR) status as required.?Perform other related duties as required.

• experience

  4-7 years

• skills

  AA/AS degree preferred

• qualifications

  MUST BE US citizensMUST HAVE Calypso CMM experience Minimum technical school / 3 years CMM programming experience and 4 years of work experience in Quality field OR 10 years work experience in Quality fieldWritten and verbal communication skills , adapt to change positively or negatively, and close attention to , policies, and , work effectively and efficiently to shop order , schematic diagrams, or formulas and confers with management or engineering staff to determine quality and reliability

• education

  High School

share this job.