Golf Equipment Maintenance Mechanic

Description

GENERAL STATEMENT OF JOB

This is the stand alone position. Incumbents analyze, inspect, test, maintain and repair a variety of vehicles and equipment. Responsibilities may include maintaining and repairing brake, engine, electrical, fuel, hydraulic, transmission, ignition, exhaust, axle assemblies, air conditioning, and related systems; performing minor body repair; changing and repairing tires; aiding disabled vehicles; and maintaining maintenance and repair records.

• PLEASE NOTE : THIS POSITION REQUIRES EXPERIENCE WITH MAINTAINING, TROUBLESHOOTING, AND REPAIRING SMALL ENGINES AND WILL REMAIN OPEN THROUGH NOVEMBER 25, 2025, OR UNTIL FILLED.

Example of Duties

SPECIFIC DUTIES AND RESPONSIBILITIES

Essential Functions :

Troubleshoots, diagnoses, and performs complex, skilled repairs and / or overhauls to vehicles and equipment in assigned area of responsibility, including inspecting, and replacing of broken or worn parts.

Diagnoses, repairs, cleans, adjusts, and installs fuel, ignition, electrical and cooling systems involving repair and replacement of applicable parts which, depending on assignment, may include carburetors, fuel pumps, starter motors, distributors, generators / alternators, voltage regulators, wiring, switches, batteries, radiators, thermostats, and water pumps.

Performs preventative maintenance and servicing activities which, depending on assignment, may include changing oil; changing filters; applying lubricants; checking fluid levels; inspecting brakes, chassis components, and tires; and performing related activities.

Completes a variety of logs, documents, and / or simple reports regarding quantity of materials handled, equipment operations, vehicle conditions, maintenance, and repair activities, and / or related information.

Cleans shop floor, drain pan, buckets, etc.; disposes of unusable replacement parts such as batteries, brake drums, etc.; disposes of used motor oil, transmission fluid, and antifreeze.

Performs other duties of a similar nature or level.

Typical Qualifications

MINIMUM EDUCATION AND TRAINING

Education and Experience

High school diploma or GED equivalent.

Two (2) years experience in small engine repair.

License and Certifications

Possession of a valid driver's license.

Supplemental Information

MINIMUM QUALIFICATIONS AND STANDARDS REQUIRED

Knowledge, Skills, and Abilities :

Knowledge of :

Skilled vehicle and / or equipment maintenance and repair practices and procedures in assigned area of responsibility;

Applicable tools and equipment;

Diagnostic devices utilized in identifying vehicle and / or equipment malfunctions;

Occupational hazards and safety precautions;

Recordkeeping principles;

Computers and related software applications.

Skill in :

Using applicable tools and equipment;

Maintaining and repairing vehicles and equipment;

Detecting and diagnosing vehicle and equipment malfunctions;

Maintaining operational records and reports;

Using a computer and related software applications;

Communication, interpersonal skills as applied to interaction with subordinates, coworkers, supervisor, the public, etc. sufficient to exchange or convey information and to receive work direction.

Physical Requirements :

The work is very heavy work which requires exerting in excess of 100 pounds of force occasionally and / or more than 50 pounds of force frequently, and / or more than 20 pounds of force constantly to move objects. Additionally, the following physical abilities are required :

Balancing : Maintaining body equilibrium to prevent falling while walking, standing, or crouching on narrow, slippery, or erratically moving surfaces. The amount of balancing exceeds that needed for ordinary locomotion and maintenance of body equilibrium.

Climbing : Ascending or descending ladders, stairs, scaffolding, ramps, poles, and the like, using feet and legs and / or hands and arms. Body agility is emphasized.

Crawling : Moving about on hands, knees, hands, and feet.

Crouching : Bending the body downward and forward by bending leg and spine.

Feeling : Perceiving attributes of objects, such as size, shape, temperature, or texture by touching with skin, particularly that of fingertips.

Fingering : Picking, pinching, typing, or otherwise working, primarily with fingers rather than with the whole hand as in handling.

Grasping : Applying pressure to an object with the fingers and palm.

Hearing : Perceiving the nature of sounds at normal speaking levels with or without correction. Ability to receive detailed information through oral communication, and to make the discrimination sound.

Kneeling : Bending legs at knee to come to a rest on knee or knees.

Lifting : Raising objects from a lower to a higher position or moving objects horizontally from position-to-position. It occurs to a considerable degree and requires substantial use of upper extremities and back muscles.

Mental Acuity : Making rational decisions through sound logic and deductive processes.

Pulling : Using upper extremities to exert force to draw, haul or tug objects in a sustained motion.

Pushing : Using upper extremities to press against something steady to thrust forward, downward, or outward.

Reaching : Extending hand(s) and arm(s) in any direction.

Repetitive Motion : Substantial movements (motions) of the wrist, hands, and / or fingers.

Speaking : Expressing or exchanging ideas by means of the spoken word including the ability to convey detailed or important spoken instructions to other workers accurately and concisely.

Standing : Particularly for sustained periods of time.

Stooping : Bending body downward and forward by bending spine at the waist. It occurs to a considerable degree and requires full motion of the lower extremities and back muscles.

Talking : Expressing or exchanging ideas by means of the spoken word including those activities in which they must convey detailed or important spoken instructions to other workers accurately, loudly, or quickly.

Visual ability 1 : sufficient to perform an activity like preparing and analyzing data and figures; transcribing; viewing a computer terminal; and / or extensive reading.

Visual ability 2 : sufficient to include color, depth perception, and field vision.

Visual ability 3 : sufficient to determine the accuracy, neatness, and thoroughness of the work assigned or to make general observations of facilities or structures.

Visual ability 4 : sufficient to operate motor vehicles and / or heavy equipment, both day and night.

Visual ability 5 : sufficient to perform an activity such as : visual inspection involving small defects, small parts, operation of machines; using measurement devices; and / or assembly or fabrication parts at distances close to the eyes.

Walking : Moving about on foot to accomplish tasks, particularly for long distances or move from one work site to another.