The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and / or components using customer supplied drawings and / or blueprints while holding tolerances of + / -.010 and / or .5% angular.
Primary Responsibilities :
Must be able to meet or exceed the requirement of the project through manual fabrication such as port alignment, scribing, cutting / coping, tacking, tuning and welding while maintaining angular tolerance's of + / - ½ %, focal lengths and target points of + / - .010; closely collaborate with machinists throughout the manufacturing process for each phase of the project.
Must be able to use Argon gas and TIG Welding procedures to connect metal components
Must be able to position and clamp metal components for welding.
Able to perform fusion weld, fillet welds and butt weld with full penetration.
Must know the proper weld settings for welding various materials along with filler rod selection.
Must be able to produce vacuum tight welds in hard-to-reach areas of chambers.
Ability and understanding of how to identify the proper order of operations (identifying the main datum point / sequence of hole penetration)
Must pay close attention to details on blueprints.
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
Ability to take direction from supervisor.
Ability to focus attention on details.
Welder - Earn Up to $37/hr • 92697 Irvine, CA, US
We are seeking an experienced TIG & Laser Welder to join a production team in El Monte, CA.Increase your chances of reaching the interview stage by reading the complete job description and applying...[internal_linking.show_more]
We're looking for a precise and detail-oriented TIG Welder to join our aerospace manufacturing team.You'll work with steel, aluminum, and Invar 36 materials, producing clean, spec-compliant welds o...[internal_linking.show_more]
Shift & Pay: 1st: 6am-2:30ppm - $20-$28/hr DOE 2nd: 2pm - 10:30pm - $20-$28/hr DOE Qualifications The candidate must show the ability to fabricate complex signage <...[internal_linking.show_more]
Shop Welder - Structural Steel Fabrication.This role requires proficiency in reading blueprints, measuring and fitting structural components, and fabricating steel assemblies including stairs, pipe...[internal_linking.show_more]
This position is responsible for performing a variety of tasks to aid daily in the manufacturing environment.Required tasks may include but are not limited to, cutting/shaping of aluminum, loading/...[internal_linking.show_more]
Structural Ironworker/Welder -Intermediate position (not entry level must have at least 2 years in structural iron work).Company: The Steel Erection Company (TSEC).Position Type: Full time opportun...[internal_linking.show_more]
PAY & INCENTIVES • 30% of the gross • $2200 - $3500 weekly take-home pay • 3000+ miles weekly • Cash Advance available • Clean Inspection Bonuses • Referral Bonuses • Pay period is Monday to Sunday...[internal_linking.show_more]
JOB Summary: Fabricate and/or repair precision carbide and steel tooling (dies, jigs, fixtures, gauges, etc.Essential Duties, Responsibilities and Competencies: Studies specifications such as bluep...[internal_linking.show_more]
PAY & INCENTIVES • 28%- 30% from gross for step deck • $2000 - van / $2400 - stepdeck average weekly take-home pay • 2800-3000 for van / 2300 for step deck, average miles available weekly • Running...[internal_linking.show_more]
FLATBED DRIVERS WANTED – BIG PAY, STEADY MILES 💰.Tired of sitting and low checks? Come run with a company that keeps you moving and paid.Consistent flatbed freight – NO sitting.Newer Freightliner ...[internal_linking.show_more]
Welder For over 75 years Cascade Pump has been a leader in Low Lift high volume Industrial water pump manufacturing.We are looking for a Welder to be responsible for welding Flanges to Columns, bas...[internal_linking.show_more]
Welder Job Duties: Expertly welds small, medium, and large bore pipe of various metals and alloys.Solders and brazes of copper pipe.Performs complex mechanical installations ...[internal_linking.show_more]
England is Now Hiring Dedicated CDL-A Drivers in Colton, CA!.No-Touch Freight - Drivers Average $83,000 Annually*.A valid CDL-A and 3+ months of current experience are required.This Dedicated Walma...[internal_linking.show_more]
Inland Xpress is Now Hiring CDL-A Dedicated Team Truck Drivers.Top Drivers Earn Up to $100,000 Annually - 100% No-Touch Freight.Reliable Home Time - OTR Lanes 4 - 6 Weeks Out.We have the happiest t...[internal_linking.show_more]
Find out why our employees choose Cascade and what it's like to work here by visiting our Careers Page at www.HERE'S WHAT YOU NEED TO KNOW - * We offer competitive pay and benefits - * Starting wag...[internal_linking.show_more]
The Welder is responsible for very precise TIG Welding / Fabrication of custom chambers and/or components using customer supplied drawings and/or blueprints while holding tolerances of +/-.Primary ...[internal_linking.show_more]
System Transport is Now Hiring CDL-A Flatbed Drivers - Southern Regional!.Experienced flatbed CDL-A drivers.Full pay package also includes other accessorial compensation to include tarp pay, stop p...[internal_linking.show_more]
TAIT partners with artists, brands, IP holders and place makers to bring culture-defining, never-before-seen experiences to life.With a legacy of innovation spanning over 45 years, TAIT has grown f...[internal_linking.show_more]
