Talent.com
Experienced Encapsulation Machine Operator
Experienced Encapsulation Machine OperatorLIFEBLOOM Corp. • Brea, California, United States
Experienced Encapsulation Machine Operator

Experienced Encapsulation Machine Operator

LIFEBLOOM Corp. • Brea, California, United States
[job_card.30_days_ago]
[job_preview.job_type]
  • [job_card.full_time]
  • [filters_job_card.quick_apply]
[job_card.job_description]

Encapsulation Machine Operator (Experienced).

As an Encapsulation Machine Operator, you will be responsible for setting up and operating an encapsulation machine. You will also be responsible for cleaning the equipment, utensils and, the room in which you operate. You may be required to assist with other various tasks that may include other processes, departments, or equipment.

Duties and Responsibilities :

  • Comply with current good manufacturing practices (cGMPs), follow all standard operating procedures (SOPs), and must be able to interpret, follow and complete scheduled production on time.
  • Must have the ability to read, follow detailed Batch Production Record instructions and fill out documents.
  • Set up and operate equipment; if needed, adjust settings during operation.
  • Disassemble and reassemble equipment i.e. perform mold changes.
  • Verification of equipment settings and molds before encapsulation.
  • Perform in-process checks until the batch is complete i.e. fill weight, etc.
  • Collect and weigh capsule yields into containers using platform bench scales.
  • Calculate and record total theoretical capsule yield and actual yield.
  • Ensure proper operation of equipment and promptly reports any concerns to management.
  • Clean and sanitize equipment / part prior to and / or after use; disassembling and reassembling as needed.
  • Sweep / wash floors and work areas to maintain equipment and work area in a sanitary condition.
  • Move cases to designated areas.
  • Work with Quality Dept. to perform quality checks on a daily basis.
  • Develop strong lines of communication with other co-workers to ensure plant efficiency.
  • Must wear appropriate gear : hairnets, gloves, hearing protection, masks, etc.
  • Perform other duties as needed.

Experience and Skilled required :

  • High School Diploma or GED.
  • Min. 1+ years of experience operating encapsulation machines.
  • Ability to use a calculator to add, multiply, subtract and divide decimals and basic units of measure.
  • Benefits :

  • Health Insurance.
  • Dental Insurance.
  • Vision Insurance.
  • Life Insurance.
  • Select Paid Holidays.
  • Paid Sick Days.
  • Year-End Bonus after the first year.
  • Working conditions :

  • Must be able to lift and carry 50lbs.
  • Required to stand for long periods of time, stoop and bend, stretch and reach with arms extended to remove or lift boxes.
  • Will be exposed to allergens (powders), odors, dust, or particles.
  • Must be able to withstand loud noises; noise level can be loud.
  • Non-management full-time position : Mon-Fri (8 hr shift) may be required to work overtime and weekend.
  • No Working Remote.
  • Compensation :
  • $17-22 / hr
  • About LIFEBLOOM Corp. :

    At Lifebloom Corp. we strive to provide quality service for all of our customer's wellness needs. We offer a comprehensive program of services, turnkey solutions and client support that exceeds all expectations in any market.

    [job_alerts.create_a_job]

    Machine Operator • Brea, California, United States

    [internal_linking.related_jobs]
    Gear Machinist

    Gear Machinist

    RBC Bearings Incorporated • Garden Grove, California, United States
    [job_card.full_time] +1
    [filters_job_card.quick_apply]
    Western Precision Aero, LLP, WPA located in Garden Grove, California, is a manufacturer of precision machined components and assemblies for the aerospace and industrial markets.We are currently loo...[show_more]
    [last_updated.last_updated_variable_days]
    Orthopedic Cast Technician

    Orthopedic Cast Technician

    Orthopaedic Specialty Institute Medical Group of Orange County • Orange, CA, USA
    [job_card.full_time]
    [filters_job_card.quick_apply]
    This position is responsible for coordinating and advising on all aspects of casting / splinting.This position is a Full-Time Non-Exempt position. Apply and / or remove cast / splint as ordered by physici...[show_more]
    [last_updated.last_updated_30]
    Finishing Machine Operator

    Finishing Machine Operator

    Financial Statement Services, Inc • Santa Ana, CA, US
    [job_card.full_time]
    [filters_job_card.quick_apply]
    Opening its doors over 45 years ago, FSSI is a leading document outsourcing company servicing Fortune 500 companies in the financial, banking, insurance and billing industries across the U.FSSI is ...[show_more]
    [last_updated.last_updated_variable_hours]
    HR Generalist (Bilingual)

    HR Generalist (Bilingual)

    Vaco by Highspring • Altadena, California, United States
    [job_card.temporary]
    Culver City, CA (Hybrid – onsite 2 days / week).Monday–Friday, 8 : 00 AM – 5 : 00 PM.Temporary, covering LOA / maternity leave. Bilingual in Spanish is a must.We are seeking a hands-on HR Generalist to prov...[show_more]
    [last_updated.last_updated_1_day] • [promoted]
    CNC Machine Operator 3 - 2nd shift

    CNC Machine Operator 3 - 2nd shift

    Safran • Garden Grove, CA, US
    [job_card.full_time] +2
    Manufacture assembly and repair - Assembly.CNC Machine Operator 3 - 2nd shift.Are you ready to be part of a team that drives big ideas and even bigger wins? At Safran, we believe in the power of bo...[show_more]
    [last_updated.last_updated_30] • [promoted]
    Machine Operator - 2nd Shift

    Machine Operator - 2nd Shift

    RBC Bearings • Santa Ana, California, United States
    [job_card.full_time] +1
    [filters_job_card.quick_apply]
    RBC Bearings Incorporated (NYSE : RBC / RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospac...[show_more]
    [last_updated.last_updated_variable_days]
    | Electroplater 1 - 1st Shift

    | Electroplater 1 - 1st Shift

    Noble Aerospace • Stanton, CA, United States
    [job_card.permanent]
    Under the direction of the department Supervisor, the Electroplater is responsible for performing the plating of metallic parts to. ESSENTIAL DUTIES & RESPONSIBILITIES : .Plans processes and sequence ...[show_more]
    [last_updated.last_updated_variable_days] • [promoted]
    Expeditor

    Expeditor

    Connect Staffing • Huntington Beach, CA, US
    [job_card.full_time]
    MINIMUM 6 MONTHS OF RECENT EXPERIENCE.Connect Staffing is seeking a Production Expeditor for a faucet manufacturing facility in Huntington Beach, CA. Requirements for the Production Expeditor : ....[show_more]
    [last_updated.last_updated_variable_days] • [promoted]
    CNC Set Up Operator

    CNC Set Up Operator

    Precision Resource • Huntington Beach, CA, US
    [job_card.full_time]
    [filters_job_card.quick_apply]
    Bring your manufacturing skills to a role that has direct impact on delivering cutting edge technology to our global customer base. Family-owned for over 70 years, Precision Resource is a leading gl...[show_more]
    [last_updated.last_updated_variable_days]
    1st Shift Masker

    1st Shift Masker

    Manpower Inc • Garden Grove, CA, United States
    [job_card.full_time]
    Our client, a leader in the manufacturing industry, is seeking a 1st Shift Masker to join their team.As a 1st Shift Masker, you will be part of the production department supporting quality assuranc...[show_more]
    [last_updated.last_updated_variable_days] • [promoted]
    Saw Operator

    Saw Operator

    Ultimate Image Printing • Santa Ana, California, United States
    [job_card.full_time]
    [filters_job_card.quick_apply]
    Artbeat Studios a division of Ultimate Image Printing, is a fast-paced, rapidly growing company specializing in.We're passionate about quality and innovation, and we are looking for a dependable, s...[show_more]
    [last_updated.last_updated_30]
    Machinist

    Machinist

    eTeam Inc • Santa Ana, California, United States
    [job_card.full_time]
    [filters_job_card.quick_apply]
    The Wheel Rotary Machinist must be flexible to meet the business and customer s needs, including frequently reworking expander and compression wheels to meet tight tolerances for Engineering and Cu...[show_more]
    [last_updated.last_updated_30]
    Aerospace Assembler

    Aerospace Assembler

    Flag Solutions • Santa Ana, CA, United States
    [job_card.full_time]
    [filters_job_card.quick_apply]
    Job Title : Aerospace Assembly Level II Location : Santa Ana, CA (On-site)[show_more]
    [last_updated.last_updated_variable_days]
    Experienced Set Up Machinist

    Experienced Set Up Machinist

    Ricaurte Precision, Inc. • Santa Ana, CA, US
    [job_card.full_time]
    The Set Up Machinist must set up and run various multi-axis CNC machines by following company Work Order instructions and company processes and procedures to include detailed data entry into the co...[show_more]
    [last_updated.last_updated_variable_hours] • [promoted] • [new]
    1st shift Masker

    1st shift Masker

    Volt • Newport Beach, CA, United States
    [job_card.full_time]
    Volt is immediately hiring for.Provide support to General Plate department and supporting processes.Masking and Demasking small aerospace parts. Inform management of quality issues.Perform in-proces...[show_more]
    [last_updated.last_updated_variable_hours] • [promoted] • [new]
    Set-Up Tech I

    Set-Up Tech I

    Cambro Manufacturing • Huntington Beach, CA, United States
    [job_card.full_time]
    Second Shift (United States of America).Set-Up Tech I is responsible for performing the complete mold change process including. mold / supply preparation in advance, mold removal, mold installation, ...[show_more]
    [last_updated.last_updated_30] • [promoted]
    Expeditor, 2nd Shift

    Expeditor, 2nd Shift

    Masco • Santa Ana, CA, US
    [job_card.full_time]
    The Expeditor is responsible for daily reviewing the Estimated Time of Arrival (ETA) Commitment report and Past Due reports to identify material shortages, plans, releases, and schedule work orders...[show_more]
    [last_updated.last_updated_variable_days] • [promoted]
    CNC Lathe, Set Up & Operate (ATR) - 2nd Shift (M - Th, 11 am - 9 : 30 pm)

    CNC Lathe, Set Up & Operate (ATR) - 2nd Shift (M - Th, 11 am - 9 : 30 pm)

    Tsubaki ATR, LLC • Santa Ana, California, United States, 92707
    [job_card.full_time]
    The TSUBAKI name is synonymous with excellence in quality, dependability, and customer service.Tsubaki is a leading manufacturer and supplier of power transmission and motion control products.As a ...[show_more]
    [last_updated.last_updated_30]