Job Overview Join our innovative team as an Electronics Test Technician specializing in High Power Systems!
In this dynamic role, you will be at the forefront of testing, troubleshooting, and validating advanced high-power electronic components and systems.
Your expertise will ensure that our products meet the highest standards of quality, safety, and performance.
This position offers an exciting opportunity to work with cutting-edge technology, contribute to product excellence, and grow your skills in a fast-paced manufacturing environment.
Requirements :
Certificate or Degree in Electronics (prefer AS Degree) Experience Minimum of three years electronics experience
Experience with High Power electronics—480 VAC, single phase and three phase power
Knowledge of AC to AC Converter Systems preferred
Familiarity and experience with IGBT’s, analog circuitry and AC-DC conversion
Knowledge of through hole and SMT circuitry
Power supply experience
Knowledge of Power Factor Correction circuitry Duties :
Tests production sub-assemblies, modules, and systems to ensure proper operation per established test criteria and / according to the daily priorities assigned by the Test Supervisor.
Troubleshoots Production units, PCB’s, Sub-Assemblies down to the component level (Where applicable) to determine cause of the non-conformance.
Performs a thorough inspection of each unit, PCB or subassembly prior to testing on a daily basis.
Performs required repairs to return units when necessary to operational state and tests to factory specifications.
Performs Burn-In process where required.
Troubleshoots electrical and mechanical problems to determine root cause of issue and relays information to the Test & QC Manager and / or Engineering Dept.
Uses test fixtures to test modules, circuit boards, etc
Notifies the Test & QC Manager of any defective test equipment, test fixtures, tools, etc.
Operates oscilloscopes, meters, power supplies, loads, test fixtures, etc. and understands their use and function.
Uses hand tools and operates small power tools and understands their function
Maintains work bench to secure a clean and safe working area.
Follows all safety rules that have been implemented by the company at all times and reports any unsafe conditions to their immediate supervisor.
Acquires parts from the stockroom, when needed, to repair any defective PCB’s, assemblies or units.
Reports any unusual problems that occur during testing to the Test & QC Manager or Test Supervisor so that an investigation can begin immediately whenever the situation arises.
Job Types :
Full-time, Contract Benefits : Dental insurance Health insurance Vision insurance Powered by JazzHR
[job_alerts.create_a_job]
Electronic Technician • Costa Mesa, CA, US
[internal_linking.similar_jobs]
Associate Mechanical Test Technician (3rd Shift)
Element Materials Technology • Huntington Beach, CA, United States
[job_card.full_time]
Associate Mechanical Test Technician (3rd Shift).Associate Mechanical Test Technician (3rd Shift).This entry-level role is ideal for individuals beginning their career in mechanical testing, instru...[show_more]
Well established electronic contract manufacturer, Golden West Technology, is looking for a Test Technician to work in its industrial products assembly area.
Entry level pay scale would be $19 based...[show_more]
[last_updated.last_updated_30] • [promoted]
Associate Mechanical Test Technician (2nd Shift)
Element Materials Technology • Huntington Beach, CA, United States
[job_card.full_time]
Associate Mechanical Test Technician (2nd Shift).Associate Mechanical Test Technician (2nd Shift).This entry-level role is ideal for individuals beginning their career in mechanical testing, instru...[show_more]
The Maintenance Technician position must demonstrate and promote a strong commitment to providing the best possible experience for our guests and associates.
The position is responsible for ensuring...[show_more]
[last_updated.last_updated_1_day] • [promoted]
Non Destructive Test Technician
Staffmark Group • Santa Ana, CA, United States
[job_card.permanent]
Looking for Stability? Start with This Temp-to-Hire Job!.Staffmark has an exciting opportunity that you won't want to miss! We've partnered with a leading company in Santa Ana, CA.Non Destructive T...[show_more]
Karman Space & Defense- Huntington Beach • Huntington Beach, CA, US
[job_card.permanent]
Without the strength of our engineer team, we would not be able to offer the industry-leading service we’re known for.We’re seeking an experienced Test Technician to work in the enginee...[show_more]
ALL METALS PROCESSING OF ORANGE COUNTY LLC • Stanton, CA, US
[job_card.permanent]
The primary responsibility of the Certified Non-Destruct Test Technician Level 2 is to test and inspect parts and assemblies for defects using automated and manual methods and techniques including ...[show_more]
[last_updated.last_updated_30] • [promoted]
Experienced Field Stack Testers (Emissions Testers)
Alliance Technical Group • Cypress, CA, United States
[job_card.full_time]
HIRING NOW-EXPERIENCED FIELD STACK TESTERS FOR ALL LOCATIONS ACROSS THE U.RELOCATION REIMBURSEMENT PACKAGES & SIGN-ON BONUSES AVAILABLE FOR THE IDEAL CANDIDATE.
LOCATIONS BELOW ARE ALL OPEN TO EXPER...[show_more]
[last_updated.last_updated_30] • [promoted]
Non-Destructive Test Technician Level 2 Magnetic
iStaffing • Santa Ana, CA, US
[job_card.permanent]
The primary responsibility of the Certified Non-Destruct Test Technician Level 2 is to.ESSENTIAL DUTIES & RESPONSIBILITIES : .
Essential functions are the core duties or tasks that the employee wi...[show_more]
Element Materials Technology • Huntington Beach, CA, United States
[job_card.full_time]
General Manager, Material Testing.Element has an opportunity for a General Manager to lead our Huntington Beach location.
Reporting directly to the Division Director, the General Manager will have f...[show_more]
[last_updated.last_updated_30] • [promoted]
Senior Principal Electrical Engineer - Analog
Leonardo DRS • Cypress, CA, United States
[job_card.full_time]
The Electro Optical InfraredSystems (EOIS) line of business within DRS has locations in Dallas and Austin, TX, Melbourne, FL, and Cypress, CA.
EOIS develops, manufactures, and supports infrared and ...[show_more]
[last_updated.last_updated_30] • [promoted]
#1599 | Non-Destruc Test Tech 2 - 1st Shift
ALL METALS PROCESSING OF ORANGE COUNTY LLC • Santa Ana, CA, US
[job_card.permanent]
The primary responsibility of the Certified Non-Destruct Test Technician Level 2 is to test and inspect parts and assemblies for defects using automated and manual methods and techniques including ...[show_more]
[last_updated.last_updated_30] • [promoted]
Test Technician
Tec West Irvine • Fountain Valley, CA, US
[job_card.full_time]
We are seeking an experienced Test Technician to support the Testing Department by maintaining the functionality, reliability, and productivity of testing equipment.
The ideal candidate will have st...[show_more]
ALL METALS PROCESSING OF ORANGE COUNTY LLC • Santa Ana, CA, US
[job_card.permanent]
The primary responsibility of the Certified Non-Destruct Test Technician Level 2 is to test and inspect parts and assemblies for defects using automated and manual methods and techniques including ...[show_more]
The primary responsibility of the Certified Non-Destruct Test Technician Level 2 is to test and inspect parts and assemblies for defects using automated and manual methods and techniques including ...[show_more]
Reporting to the Area Manager, the Test Technician is responsible to commission and test primary and secondary power equipment in the field which includes maintaining medium to high-voltage substat...[show_more]
[last_updated.last_updated_variable_days]
Test Technician (2nd Shift)
Butler Aerospace and Defense • Buena Park, CA, US
[job_card.permanent]
Under minimal supervision, sets-up and runs standardized tests on electro-mechanical power distribution systems, parts, components or relays accounting to published procedures.Records and interpret...[show_more]