Quality Control InspectorOceaneering • Houston, TX, US
[error_messages.no_longer_accepting]
Quality Control Inspector
Oceaneering • Houston, TX, US
[job_card.variable_days_ago]
[job_preview.job_type]
- [job_card.full_time]
[job_card.job_description]Ability to read drawings, comprehend specifications and tolerances, read dial indicators and digital gages, compare results with specifications and record test data, confer with engineers, technicians and production personnel as necessary. Demonstrate advanced ability to perform dimensional checks and visual verifications of fabricated and machined parts to acceptance criteria. Uses measurement, test equipment and functional gages to determine if product meets all stated requirements. Validate the quality of machined and fabricated parts, and assemblies in terms of dimensional accuracy and visual verification according to acceptance criteria. Ability to review data supplied with material and parts to acceptance criteria, such as : dimensional reports, traceability reports and certificates of conformity. Liaise with suppliers as required to ensure good product, documentation and service quality is maintained. Understand and adheres to requirements of Gage Calibration, and Measurement System Analysis (MSA). Develop and maintain inspection plans per drawing requirements. Interpret inspection results. Assists more experienced technicians and professionals in technical tasks. Performs technical work tasks requiring moderate technical experience. Checks in with supervisors routinely, successfully completes task as requested, and begins to think independently about solutions for recurring problems in equipment handling. Elevates issue when beyond scope of position. Applies routine techniques and standards under moderate supervision. Shows initiative and enthusiasm to solidify foundational understanding of the work area, gain exposure to related work areas, and reach out for new skills. Works under well-defined procedures and guidelines that require low levels of troubleshooting. Mentors or gives technical guidance to junior inspectors and technicians. Performs a range of tasks with autonomy and may act as a cross departmental technical lead. Applies a range of techniques and standards autonomously. Shall be utilized as subject matter expert in quality control techniques. Displays advanced professional communication and interpersonal skills when exchanging information with peers and supervisors. Often serves as a resource to others in the resolution of complex problems. Ensure all existing working procedures, practices and systems are followed. Ensure in date calibrated measuring equipment is used for performing inspection. Must have a thorough understanding of advanced measurement techniques, and a basic understanding of Statistical Process Control. Issues document, investigate, and track non conformances and inspection records in the following SmartSolve modules : Inspection Management, Non Conformance and Corrective Action / Preventive Action. Shall be capable of completing inspections, such as : FAT, SIT, FAI, In-Process, Final, Receiving inspections. Work as a team member when performing or witnessing inspection and / or testing for internal and external customers, third parties, customer's inspectors, and engineering / manufacturing representative. Assist in developing and improving quality system procedures, work instructions, flow charts and associated process improvements. Uses safe material handling and preservation techniques, such as, operating a forklift and jib cranes, packing / preservation to prevent deterioration or damage. Product identification responsibilities include verification and / or physical product marking for traceability. Support the customer satisfaction and loyalty processes. Support the organization's drive towards excellence in Health and Safety performance. Support includes but is not limited to participating in STOP observations, reporting HSE observations, attending HSE related meetings, supporting HSE improvement projects and any other related task deemed appropriate by the Manager. Minimum of 3-5 years of Quality Control experience and / or training; or equivalent combination of education and experience. Proficient in the use of advanced quality inspection techniques. Knowledge of ISO 9001 requirements. Ability to perform dimensional checks and visual inspections of raw materials, fasteners, fabricated, and machined parts in accordance with acceptance criteria. Skilled in reading dials and digital displays, comparing results to specifications, recording test and inspection data, and collaborating with engineers, technicians, and production personnel. Working knowledge of Microsoft Word and Microsoft Excel. Associate's Degree or equivalent from a two-year college or technical school. Knowledge of ISO 17020 and ISO 17025. Knowledge in NDT methodologies. CWI Certification. Ability to work in a team environment, remaining attentive to ideas, recognizing responsibilities, and actively participating with others to accomplish assignments and achieve desired goals. Generally, work performed indoors (80%) and occasional outdoors (20%). Hours of work depend on shift assigned. Occasional exposure to airborne dust in the workplace. Work surface is stable (flat). Requires a great deal of manual dexterity, such as working with measuring and testing equipment, marking and hand / power tools. OCCASIONAL FREQUENT CONSTANT Lift 20-50 pounds. Work in confined spaces , kneel, jump, run, work while lying on stomach / back, crawl, and use repetitive movements of the arms and hands. Identify color differences. Wear PPE for skin protection. Lift 10-25 pounds. Climb stairs / ladders, stand, balance, stoop, squat, reach, and lift / carry objects. Twist body, sit with back supported, head forward / flexed, head tilted / rotated, and work with arms extended overhead. Operate a motor vehicle. Lift up to 10 pounds. Wear PPE protection for body, vision, and hearing protection.
Job Description
Company Profile
Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries.
Position Summary
The Quality Control Inspector is responsible for interpreting specifications to determine appropriate testing and inspection procedures, as well as the equipment required. This role ensures accurate documentation and tracking of non-conformance reports and materials. The inspector must be able to work independently with minimal instruction and supervision while maintaining compliance with quality standards.
LOCATION :
Requires daily onsite attendance; this is not a remote-work position.
Duties And Responsibilities
ESSENTIAL : \n
- Responsible for performing inspections on materials, products, assemblies, sub-assemblies.
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n
\n \n
Qualifications
REQUIRED : \n
\n
\n
\n
\n
\n
\n \n
DESIRED : \n
\n
\n
\n
\n \n
KNOWLEDGE, SKILLS, ABILITIES, AND OTHER CHARACTERISTICS :
\n
Additional Information
PAY, BENEFITS AND WORK SCHEDULE :
We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program.
WORKING CONDITIONS :
This position is considered SHOP WORK which is characterized as follows :
\n
\n
\n
\n
\n \n
PHYSICAL ACTIVITY / REQUIREMENTS :
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
This position is considered MEDIUM work.
\n
\n
\n \n
\n
\n
\n
\n \n \n
\n
\n
\n
\n \n \n
\n
\n \n
Equal Opportunity Employer
All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors.
How To Apply
Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager / supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.
[job_alerts.create_a_job]
Quality Control Inspector • Houston, TX, US
[internal_linking.related_jobs]
Mondays - Thursdays 3pm to 1 : 30am.MIRATECH product line, in the Houston, Texas.Dimensional Inspection to verify the product matches the sales drawing.
This inspection would include but.Diameter, Ove...[show_more]
Quality Control Specialist - Power Up Your Career with Toshiba International Corp.Looking to take your technical skills to the next level with a global leader in innovation? Toshiba International C...[show_more]
With the most advanced analytical expertise and precise manufacturing capabilities in the industry, Bearings Plus can provide expert solutions to the greatest rotating equipment challenges.Waukesha...[show_more]
This role is for a Quality Control Technician who will be responsible for ensuring products meet quality standards and customer specifications.
You'll perform in-process and final inspections, as we...[show_more]
Dover Precision Components DPC (the Company) is part of Dover Corporations (the Parent Company) Pumps and Process solutions segment.
DPC holds market leading positions globally and delivers performa...[show_more]
Perform advanced (senior-level) military construction inspection work for the Construction and Facilities Management Office (CFMO) primarily for the Southeast Region.
Work involves primarily oversee...[show_more]
At Endress+Hauser, progress happens by working together.As the global leader in measurement instrumentation, our ~17,000 employees shape the future in the field of process automation.Whether develo...[show_more]
We are seeking an experienced QE Developer with strong automation expertise and a technical background suited for a fast-paced environment.
This role will focus on designing, developing, and maintai...[show_more]
Venus Aerospace is revolutionizing rocket engine propulsion.With the first generational leap in rocket engine technology since Apollo, our proprietary Rotating Detonation Rocket Engine and Venus De...[show_more] Job Opportunity : TxDOT SH 6 Widening Project Inspector.At HNTB, you can create a career that is meaningful to you while building communities that matter to all of us.
For more than a century, we hav...[show_more] 
Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry.We develop products and services for use throughout the lifecycle of an offshore oilf...[show_more] At Endress+Hauser, progress happens by working together.As the global leader in measurement instrumentation, our ~17,000 employees shape the future in the field of process automation.Whether develo...[show_more] MRI Technologies is seeking a dedicated Quality Assurance Inspector to support construction projects at NASA's Johnson Space Center in Houston, TX.
In this role, you will be on the front lines ensur...[show_more] Txdot Sh 6 Widening Project Inspector.At HNTB, you can create a career that is meaningful to you while building communities that matter to all of us.
For more than a century, we have been delivering...[show_more] 
Smart4Chemicals are recruiting for a skilled.Pasadena to support the Process Control Manager in managing the site's Distributed Control Systems (DCS) and PLCs.
This role involves troubleshooting, sy...[show_more] Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry.We develop products and services for use throughout the lifecycle of an offshore oilf...[show_more] 
Key Activities and Accountabilities.Perform inspection (visual, dimensional, gauging and comparison as appropriate) on new manufactured, repaired and modified equipment and components pre, during a...[show_more]
The Alliance Fugitive Emissions Quality Manager (QM) reports directly to the Director of Quality.The QM is an experienced professional in the field of emissions monitoring whose primary responsibil...[show_more]
Quality Control Inspector - 2nd Shift
MIRATECH Corporation • Houston, TX, USA
[job_card.full_time]
[filters_job_card.quick_apply]
[last_updated.last_updated_30]
Quality Control Specialist
Staffmark Group • Houston, TX, United States
[job_card.permanent]
[last_updated.last_updated_30] • [promoted]
Quality Supervisor
Dover Corporation • Houston, TX, US
[job_card.full_time]
[last_updated.last_updated_variable_days] • [promoted]
Quality Control Tech - Pressure Vessels
PrideStaff • Houston, TX, US
[job_card.full_time]
[last_updated.last_updated_30] • [promoted]
Inspection Lead
Dover Corporation • Pearland, Texas, USA
[job_card.full_time]
[last_updated.last_updated_variable_days] • [promoted]
TMD - Inspector V (CFMO Construction Inspector)
Houston Staffing • Houston, TX, US
[job_card.full_time]
[last_updated.last_updated_variable_days] • [promoted]
Quality Assurance / Control Technician
Endress + Hauser • Houston, TX, United States
[job_card.full_time]
[last_updated.last_updated_variable_days] • [promoted]
Quality Engineer (Houston)
Addison Group • Houston, TX, US
[job_card.part_time]
[last_updated.last_updated_variable_days] • [promoted]
Quality Engineer
Venus Aerospace • Houston, TX, United States
[job_card.permanent]
[last_updated.last_updated_30] • [promoted]
Construction Inspector II
Houston Staffing • Houston, TX, US
[job_card.full_time]
[last_updated.last_updated_30] • [promoted]
Quality Control Source Inspector
Oceaneering International, Inc. • Houston, TX, United States
[job_card.full_time]
[last_updated.last_updated_variable_days] • [promoted]
Inventory Control Specialist
Endress + Hauser • Houston, TX, United States
[job_card.full_time]
[last_updated.last_updated_30] • [promoted]
Quality Assurance Inspector
Houston Staffing • Houston, TX, US
[job_card.full_time]
[last_updated.last_updated_30] • [promoted]
Construction Inspector III
Houston Staffing • Houston, TX, US
[job_card.full_time] +1
[last_updated.last_updated_30] • [promoted]
Process Control Engineer (Houston)
Smart4 Chemicals • Houston, TX, US
[job_card.part_time]
[last_updated.last_updated_variable_days] • [promoted]
Quality Control Inspector
Oceaneering International, Inc. • Houston, TX, United States
[job_card.full_time]
[last_updated.last_updated_variable_days] • [promoted]
Quality Control Inspector
Rosehill Resources, Inc. • Houston, Texas, United States
[job_card.full_time]
[filters_job_card.quick_apply]
[last_updated.last_updated_30]
AEM Quality Manager, Fugitive Emissions
Alliance Technical Group • Houston, TX, United States
[job_card.full_time]
[last_updated.last_updated_30] • [promoted]