2025-0340 SATCOM Engineering Support Services (NS) FRI 12 Dec RELAUNCH

Description

Deadline Date : Friday 12 December 2025

Requirement : SATCOM Engineering Support Services

Location : Norfolk VA US

Full Time On-Site : Yes

Time On-Site : 100%

Period of Performance : 2026 Base : As soon as possible but not later than 02 February 2026 31 December 2026 with the possibility to exercise following options :

2027 Option : 01 January 2027 31 December 2027

2028 Option : 01 January 2028 31 December 2028

Required Security Clearance : NATO SECRET

1 PROJECT SPECIFICS

1. Scope

This Statement of Work (SOW) defines the provision of specialized SATCOM Engineering Support Services to assist NATO entities in the definition assessment and evolution of future SATCOM capabilities.

The Contractor shall provide expert engineering services to support the strategic planning design and definition of NATO SATCOM systems ensuring alignment with operational requirements interoperability standards and emerging technologies within the Alliances communication and space domains.

All work shall be performed as service-based deliverables with measurable outputs and documented technical artefacts produced under NCIAs supervision and in close coordination with Allied Command Transformation (ACT) ACO and other NATO stakeholders.

2. Objectives

The objective of this engagement is to provide engineering and analytical support to ongoing NATO activities related to the definition harmonization and modernization of SATCOM capabilities including :

• Assessment of current and future SATCOM architectures;
• Identification of capability gaps and dependencies;
• Development of engineering baselines and system-level requirements;
• Analysis of interoperability with NATO national and commercial SATCOM assets;
• Technical input to strategic planning feasibility studies and decision-making documents.

3. Tasks and Activities

The Contractor shall perform but not be limited to the following tasks :

3.1 Engineering Analysis and Studies

Conduct technical assessments of SATCOM networks terminals and anchoring systems across NATO strategic operational and tactical domains;

Support system architecture definition including integration of MILSATCOM and COMSATCOM resources;

Perform trade-off and feasibility analyses addressing performance resilience spectrum efficiency and cost-benefit aspects;

Contribute to the development of future-oriented SATCOM system concepts including Low Earth Orbit (LEO) integration software-defined payloads and multi-orbit architectures;

Create Analysis of Alternative documents for different options considered.

3.2 Requirements and Interface Definition

Develop and maintain system-level functional and technical requirements for future SATCOM systems and related ground infrastructure;

Support interoperability and standardization activities (e.g. STANAGs NATO interoperability profiles SATCOM reference architectures);

Provide interface control documentation (ICD) and configuration baselines for engineering reference.

3.3 Capability and Architecture Modelling

Contribute to modelling and simulation of SATCOM service delivery architectures and integration with existing Networks;

Assess the impact of emerging technologies such as AI-driven resource management optical links and protected waveforms;

Provide recommendations for technology insertion and obsolescence mitigation.

3.4 Stakeholder Coordination and Reporting

Liaise with ACT ACO and NCIA technical authorities providing engineering inputs and consolidated documentation;

Prepare technical briefings reports and data packages supporting NATO capability planning;

Participate in workshops technical meetings and industry engagement events as required.

2 DELIVERABLES

The contractor shall produce the following deliverables :

Deliverable D1 : Engineering Analysis Report(s) on SATCOM architectures capabilities and integration options Analysis of alternatives documents

Frequency : Quarterly or upon request

Deliverable D2 : Draft and final versions of system-level requirements and interface documents

Frequency : As scheduled

Deliverable D3 : Technical briefings presentations and meeting minutes

Frequency : As required

Deliverable D4 : Contribution to capability assessment documentation and technology surveys

Frequency : As required

3 SERVICE KPIs AND PENALTIES

The penalties defined below will apply to the payment amount based on the performance results measured through Annex B - Monthly Service Performance Report

Objective KPI01 : Deliverables submitted on schedule

Standard : % of Deliverables

Performance Threshold : 99.9% of the measured period

Penalty (if under performance threshold) : 1%

Objective KPI02 : Technical quality of documentation (clarity completeness accuracy)

Standard : % of Deliverables

Performance Threshold : 99.9% of the measured period

Penalty (if under performance threshold) : 1%

Objective KPI03 : Responsiveness to tasking and change requests

Standard : % of Completion

Performance Threshold : 100% of the scheduled tasks

Penalty (if under performance threshold) : 1%

Objective KPI04 : Contribution to stakeholder coordination

Standard : % of Completion

Performance Threshold : 99.9% of the measured period

Penalty (if under performance threshold) : 1%

Objective KPI05 : Customer satisfaction (feedback from ACT / NCIA leads)

Standard : 4 / 5 average rating

Performance Threshold : 4 / 5 average rating

Penalty (if under performance threshold) : 1%

4 PAYMENT MILESTONES

1. The payment shall be dependent upon successful acceptance of the Monthly Service Performance Report Acceptance (Annex B) signed by the SATCOM Operations Manager.

2. Invoices shall be accompanied by the Monthly Service Performance Report (Annex B) signed by the SATCOM Operations Manager.

3. Payment schedule will be according to payment milestones upon completion. Upon completion and validation of each milestones and at the end of the monthly milestone following the acceptance of the Monthly Service Performance Report.

Payments will be made according to the following schedule :

2026 BASE performance 02nd of February 2026 (tentative) to 31 December 2026

Associated Deliverables : Provision of SATCOM System Management Services

Completion Deadlines : 28 Feb 31 Mar 30 Apr 31 May 30 Jun 31 Jul 31 Aug 30 Sep 31 Oct 30 Nov 31 Dec

Monthly Payment Amount : 1 / 11 total cost for calendar year

Monthly Payment Document : Completion of milestone shall be accompanied documented Monthly Service Performance Report Acceptance (Annex B) signed by the Station Commander or authorized point of contact and the Contractor. This document will accompany the invoice.

The deadlines split is calculated considering a starting date 2nd of February 2026. This will be adjusted based on actual starting date.

OPTIONS : 01 JANUARY TO 31 DECEMBER 2027 / 2028

Associated Deliverables : Provision of SATCOM System Management Services

Completion Deadlines : 31 Jan 28 Feb 31 Mar 30 Apr 31 May 30 Jun 31 Jul 31 Aug 30 Sep 31 Oct 30 Nov 31 Dec

Monthly Payment Amount : 1 / 12 total cost for calendar year

Monthly Payment Document : Completion of milestone shall be accompanied documented Monthly Service Performance Report Acceptance (Annex B) signed by the Station Commander or authorized point of contact and the Contractor. This document will accompany the invoice.

5 PRACTICAL ARRANGEMENTS

Place of Performance : Work will be conducted primarily on-site in ACT Norfolk USA in designated as Class I and II Security Area.

Travel Requirement : Travel may be required to other Purchasers locations on exceptional basis. Travel arrangements will be the responsibility of the contractor and the expenses will be reimbursed in accordance with Article 5.5 of AAS Framework Contract and within the limits of the NCIA Travel Directive.

Hours of Operation : The Contractor is expected to follow the Purchasers working hours Monday to Thursday from 08h30 until 17h30 and Friday from 08h30 until 15h30 (USA Eastern time zone).

Reporting : The Contractor shall produce Monthly Service Performance Report completion reports (format : e-mail update) which include details of activities performed the list of the KPI completion and penalties if it is applicable.

Safety and Compliance and other arrangements :

6 SERVICE DELIVERY REQUIREMENTS

See Requirements

7 SECURITY CLEARANCE

It is mandatory for the Contractor to be in possession of a valid NATO Secret security clearance for the duration Period of Performance. Only a valid NATO security clearance is acceptable- no equivalents will be accepted.

Security requirements from NS Projects are in compliance with Security Requirements for NATO Secret (NS) Projects (Classified Projects).

Services delivery should be compliant with Project Security Instructions (PSI).

Requirements

SERVICE DELIVERY REQUIREMENTS

One resource is required to deliver the services under this SOW with the below requirements :

The Contractor shall fulfil the following requirements :

Qualifications :

Key Skills

React Native,AI,Enterprise Software,React,Node.js,Redis,AWS,Software Development,IOS,Team Management,Product Development,Mobile Applications

Employment Type : Contract

Experience : years

Vacancy : 1