Shipfitter II (Temp)

Epsilon Systems is seeking a Temporary Shipfitter II for Portsmouth, VA.

Summary: Repairs, modifies, installs and dismantles various shipboard hulls, bulkheads or decks. Designs and fabricates complex fixtures and jigs.

Responsibilities:

• Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.

• Reads and understands Epsilon Systems PPE Policy.

• Ensures that all Epsilon Systems Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.

• Reads and interprets blueprints to plan setup and operation of the machine shop equipment prior to commencing the operation.

• Lays out material prior to performing machining operations to prevent possible errors.

• Fabricates parts to close tolerances ensuring finish requirements of the drawings are achieved.

• Maintains good housekeeping practices, turning off machines when not in use, disposing of waste properly, sweeping the area, etc.

• Ensures all tools listed on the "Required Tools List" are available for use within two weeks of your employment at Epsilon.

• Qualifies as a Shipfitter in accordance with Epsilon Systems Process Instructions.

• Ensures that all requirements of the Epsilon Systems Quality Assurance Manual are followed when invoked by QA Workbook, Work Package (WP), Work Instructions (WI) and/or other guidance given by management.

• Follows detailed repair procedures and instructions (e.g.; QA packages steps, RECs, CWPs, FWPs, TGIs etc.) required completing the production operations.

• Notifies Foreman of unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).

• Reads and understands complex terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process.

• Fabricates and installs fixtures, jigs, supports and targets to ensure proper alignment during welding processes.

• Determines fit-up requirements for a wide range of structural components in accordance with required technical drawings, manuals and instructions.

• Installs complex deck, hull and bulkhead systems IAW required technical drawings, manuals and instructions.

• Designs, fabricates and installs complex fixtures, jigs and targets to ensure proper alignment during welding/ brazing procedures.

• Determines size and material requirements for system modification or installation.

• Ensures control and assumes responsibility for Level I and material controls in accordance with Process Instruction

• Strict adherence to safety, quality standards, good housekeeping habits, high level of critical thinking/reading comprehension,

• Will provide mentoring to junior craftsman.

• Frequent travel and overtime are required.

• Work outside specific trade skill is required.

Qualifications:

• High School/GED with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with Shipfitting practices in a repair department or shipyard. Knowledge and practical skills tests required.

• 5 years' of experience as a shipfitter.

• Understands and performs the setup, alignment, and operation of various portable tools and hand tools used in the trade including plasma cutting machines and oxy/fuel torches.

• Ability to read a ruler/tape measure.

• Ability to use lay-out tools such as tool scales, squares, combination squares, trammel points.

• Ability to properly prepare structural components for post assembly welding by performing end preparations such as beveling, grinding etc.

• Must be able to understand and perform the set-up, alignment, and operation of various portable tools and hand tools used in the trade including plasma cutting machines and oxy/fuel torches.

• Has more advanced knowledge of the following: shipboard plate (hull, deck, bulkhead) systems (repair/installation practices, procedures, alignments and material requirements), blue print reading and interpretation, MILSPEC requirements.

• Understands fitting of structural components using dogs, wedges, strong-backs etc.

• Must be able to fit structural components to close tolerance requirements to prevent increased welding to bridge gaps.

• Ability to fabricate and install components as directed by Technical Work documents.

• Ability to fabricate molds/templates for structural forming including plate rolling with multiple offsets.

• Must have the ability to gain access to military bases and various government facilities.

• Ability to read, write, speak, and comprehend English.

Preferred Qualifications:

• DoD Secret Security Clearance, or the ability to obtain one.

ADA Notifications:

• Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises.

• Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).

• Able to lift, carry and move objects up to 50 lbs. in weight.

• Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.

• Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.

• Able to perceive and distinguish normal range of colors.

• May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.

Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.