Engineer, Control Systems

Engineer, Control Systems

ABOUT NEXTDECADE CORPORATION

NextDecade is committed to providing the world access to reliable, lower-carbon energy. We are focused on delivering secure and cost-effective energy through the safe and efficient development and operation of natural gas liquefaction capacity at Rio Grande LNG. Through our subsidiaries, we are developing and constructing the Rio Grande LNG natural gas liquefaction and export facility near Brownsville, Texas, with approximately 48 MTPA of potential liquefaction capacity currently under construction or in development, sufficient space at the site for up to 10 liquefaction trains, and a potential carbon capture and storage project. NextDecades common stock is listed on the Nasdaq Stock Market under the symbol NEXT. NextDecade is headquartered in Houston, Texas. For more information, please visit www.next-decade.com .

SUMMARY OF THE ROLE

NextDecade is seeking a full-time Control Systems Engineer to support long-term operations for the Rio Grande LNG facility located near Brownsville, Texas.

The incumbent will report to the Manager Instrumentation, Controls, and Electrical Engineering in the Operations Department, under the leadership of the Director Facilities Engineering, Sr. Director of Engineering, and Vice President of Operations.

The Control Systems Engineer is a member of the Instrumentation and Control engineering team and may be required to backfill the Manager of Instrumentation, Controls, and Electrical Engineering during periods of absence.

The role has no direct reports, although it may be required to manage and supervise contractor controls personnel working within the facility.

Peer level personnel will include other members of the engineering team across all facilities disciplines.

This position is located in Brownsville, TX at the Rio Grande LNG site (RGLNG). Check out our RGV Spotlight Video to learn more about Brownsville and the Rio Grande Valley!

KEY RESPONSIBILITIES :

• Lead support for the following equipment, systems, and processes :
• Equipment : Distributed Control System (DCS), equipment control systems (e.g., PID controllers, Sequential logic control, Opticomp, turbine controls, local control panels, Programmable Logic Controllers (PLCs), etc.)
• Systems and Processes : Support alarm management and alarm response through control system optimization, overrides, and inhibits, software change management, DCS support, Operational Technology security / Process Control Domain (PCD) security, and control system obsolescence management.
• Lead the control systems engineering efforts for the RGLNG facility to support both day-to-day plant operations and long-term reliability and availability targets.
• Lead frontline support to operations to investigate control logic issues, causes of trips, and equipment downtime, and work proactively to maximize facility availability.
• Develop and monitor control systems Key Performance Indicators (KPIs) to ensure reliable, safe, and efficient operation.
• Coordinate DCS support engineers.
• Work closely with rotating equipment engineers and contractor turbine controls engineers for reliable performance of gas turbine driven compressor strings.
• Participate in risk assessments, PHAs, HAZOP, SIL, and SIF reviews as required.
• Ensure the Management of Change (MOC) procedures (including Software Change Requests) are followed and documentation for instruments and control systems is up to date.
• Develop and ensure adherence to all discipline specifications, standards, procedures, and guidelines.
• Monitor and report on the condition and performance of all control barriers to major accident events. Manage barrier impairment risks to As Low As Reasonably Practicable to support safe continued operations.
• Provide integral interaction and support for other intercompany teams, such as Operations, Maintenance, Quality, Process Safety Management (PSM), and Health, Safety, Security, and Environmental (HSSE).
• Prepare, execute, and maintain control systems related software licensing contracts and service agreements.
• Provide input into the instrumentation, control & safety systems budget for the Facilities Engineering Team.

MINIMUM REQUIREMENTS :

PREFERRED QUALIFICATIONS :

Job Site Work Environment

Must be able to wear all necessary PPE equipment to perform job functions.

Operates in a complex construction environment.

Exposure to indoor and outdoor weather conditions.

Not necessarily protected from weather and temperature changes. Possible exposure to hot, cold, wet, humid, or windy weather conditions.

Exposure to moving mechanical parts and electrical circuits.

Exposure to constant or intermittent sounds of a pitch level sufficient to cause marked distraction.

Routinely uses standard office and field communications equipment such as computers, phones, photocopiers w / scanner and fax, and radios.

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to support individuals with ADA-recognized disabilities to perform the essential functions for the job.

Ability to drive to other Company work locations as required.

Ability to move throughout all areas of the facility, including being physically capable of traveling to a designed muster point during emergency situations.

Stand and / or sit continuously and perform job functions for a full shift.

The incumbent is required to have fully mechanical motion and usage of all extremities.

Physically able to walk, stand, bend, stoop, kneel, reach, twist, lift, push, pull, climb, balance, crouch, handle, and lift items weighing up to 20 lbs. without assistance.

Visual acuity corrected to perform job functions. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Must be able to clearly communicate with others via radio, phone, and verbal methods.

May be required to enter confined spaces.

May be required to work at elevated heights and access elevated structures without assistance.

If you require accommodations during the application or interview process, please contact Human Resources at recruiting@next-decade.com.

Other Duties

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

NEXTDECADE VALUES

Safety We make safety a priority. Everything we do relies on the safety of our people and the communities around us.

Integrity We do the right thing, and are open, ethical, and fair. We hold ourselves to the highest standards in all that we do.

Honesty We value truth and honesty in ourselves and others. We honor our commitments and take responsibility for our actions.

Respect We listen, and respect people, the environment, and the communities in which we live and work.

Transparency Transparency builds trust. We promote open communication with our people, our customers, and all our stakeholders.

Diversity We value diversity of experiences and thoughts. It takes people with different strengths and backgrounds to make our company succeed.

NextDecade provides equal employment opportunities (EEO) to all applicants without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. NextDecade complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

PI8882376d52b2-30511-39049257