Talent.com
Bodycote
Manufacturing Load Tech - 2nd ShiftBodycote • Camas, WA
Manufacturing Load Tech - 2nd Shift

Manufacturing Load Tech - 2nd Shift

Bodycote • Camas, WA
30+ days ago
Salary
$20.00 hourly
Job type
  • Permanent
Job description

Our people are the heart of our business. As the world’s largest provider of thermal processing services, Bodycote employs thousands of highly skilled staff around the globe, some of the best engineers, scientists, and technicians in the industry. Come join our team!

Due to the nature of our business and a heavy industrial market, Bodycote deems this position to be safety-sensitive.

Summary: Performs essential job functions as directed under close supervision.

Essential Job Functions (Duties and Responsibilities): The primary duties consist of, but are not limited to the following.

· Efficiently and carefully place customer parts onto, into or out of baskets, tubs, racks or other containers as required.

· Immediately brings any unusual problem, irregularity or concern to HIP Operator, Supervisor or management.

· Practices and promotes safety and good housekeeping.

· Must be aware of environment concerns caused by process and report deficiencies to Supervisor

· Performs other tasks as assigned or dictated by position.

· This position is responsible for the care and treatment of our customer’s inventory and as such will perform duties in a safe and responsible manner to prevent customer loss or damage.

· Must have the ability to report for work on time, follow directions, interact effectively with co-workers, understand and follow rules and procedures and accept constructive criticism

Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

· This position must satisfy ITAR compliance requirements, therefore candidates must be U.S. Citizens or Permanent Resident Card Holder.

· Education: High School diploma or equivalent.

· May be required to work overtime or any shifts, including weekends.

· Must be able to obtain and maintain forklift operator certification.

· Must have attention to detail.

· Must be able to muti-task.

· 1 year manufacturing experience preferred.

· Crane and Forklift experience preferred.

· Must be able to work 2nd shift; Monday – Friday, 2:00 PM to 10:30 PM.

Physical & Mental Demands: The following physical and mental demands consist of, but are not limited to the following.

· Must be able to work in a standing position for extended periods of time in an industrial environment

· Manual dexterity to perform data entry functions

· Ability to bend, pull, stoop and reach to perform functions

· Ability to lift up to 35/lbs.

· May be exposed to heat, fumes, noise, and humidity, etc.

· Must have the cognitive and mental capacity to perform essential job functions

· Must be able to communicate effectively orally and in writing

· Visual acuity to read documents, computer screens, files, etc.

Ability to hear in person and via phonecreens, files, etc.

  • Ability to hear in person and via phone.

Pay & Benefits Information

The hourly pay range for this position is $20.00 - $23.00 per hour. Starting pay is determined based on experience, skills, and qualifications. This position is classified as non-exempt and is eligible for overtime pay in accordance with state and federal law.

This role is eligible for additional compensation, including shift differential, etc., if applicable.

Benefits include employee and family medical, prescription drug, dental, and vision coverage; company paid life and disability; HSA/FSA options; 401(k) with company match; paid time off and paid holidays; and an Employee Assistance Program. Benefits eligibility begins on day 61 of employment.

This position is eligible for a $1,500 sign-on retention bonus!

The statements herein are intended to describe the general nature and levels of the work performed by employees, but are not a complete list of responsibilities, duties, and skills required of personnel so classified. Furthermore, the job description does not constitute a written or implied contract for employment. Bodycote reserves the right to revise or change job duties and responsibilities as the need arises.

Bodycote has a longstanding commitment to provide a safe, quality-oriented, and productive work environment and for these reasons, all applicants in the United States who receive a conditional offer of employment must undergo a drug screen before employment begins.

Bodycote is an Equal Opportunity Employer and does not discriminate against current and prospective employees based on race, religious creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic information, marital status, sex, gender, gender identity, gender expression, age for individuals over forty years of age, military and veteran status, sexual orientation, or any other basis protected by applicable federal, state and local laws.

Create a job alert for this search

Manufacturing Load Tech - 2nd Shift • Camas, WA

Similar jobs

Tool Install Project Manager

Analog DevicesCamas, WA, United States
Full-time +1

Organization: Semiconductor Manufacturing Expansion & Factory Operations.Reports To: Senior Manager, Facilities Tool Install.Location: Beaverton, Oregon (primary) | Support Camas, Washington.Level... Show more

 • Promoted

Senior Scheduling Manager

MWHGresham, OR, United States
Full-time

MWH is a leading water and wastewater treatment-focused general contractor in the US with a rich history dating back to the 19th century.Fueled by the mission of Building a Better World, our teams ... Show more

 • Promoted

Fleet Technician - Experienced (non-DOT)

Frito-Lay North AmericaGresham, OR, United States
Full-time

Descriptions & requirements Job Description Frito-Lay Fleet Technicians are essential to our team because they work on our fleet vehicles and keep our drivers safe.Are you looking for a job ... Show more

Equipment Maintenance Technician - Thin Films C Day Shift (Gresham)

OnsemiGresham, OR, United States
Full-time

Job Descriptiononsemi is seeking an Equipment Maintenance Technician - Thin Films.As an Equipment Maintenance Technician at onsemi's 200mm manufacturing facility in Gresham, Oregon, you will work i... Show more

 • Promoted

Shift Leader

Panda Restaurant GroupSandy, OR, US
Full-time

Our Panda Shift Leader associates are important leaders of our team and are responsible for bringing Panda’s mission alive in our restaurants by supporting management in creating food with passion,... Show more

Shift Leader (P1-1360803-0)

Panda Restaurant GroupSandy, OR, United States
Full-time

Our Panda Shift Leader associates are important leaders of our team and are responsible for bringing Panda's mission alive in our restaurants by supporting management in creating food with passion,... Show more

 • Promoted

Wafer Fab Operator - All Shifts Available

Analog DevicesCamas, WA, United States
Full-time +2

About Analog DevicesAnalog Devices, Inc.NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge.ADI combines anal... Show more

 • Promoted

Team Lead

Rack Room ShoesTroutdale, OR, United States
Part-time

Team LeadLocation:Troutdale, Oregon USThe Team Lead assists in supervising and managing all day-to-day store operations while ensuring that 100% compliance exists with all established Company polic... Show more

 • Promoted

Senior Manager, Manufacturing IT

Analog DevicesCamas, WA, United States
Full-time +1

Senior Manager, Manufacturing IT Camas (ADCS).NASDAQ: ADI) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge.ADI combine... Show more

 • Promoted

Machine Operator (choose AM, Day or PM shift)

PepsiCo, Inc.Camas, WA, United States
Full-time +1

Go just about anywhere and you will find Pepsi products.As a Pepsi Stocker, you can take pride in knowing that you helped get Pepsi products to every corner of the world! Not to mention, you will e... Show more

 • Promoted

Shift Supervisor

Taco BellTroutdale, OR, United States
Full-time +1

Are you ready to take charge and lead a dynamic team in a fast-paced environment? Whether you're seeking a fulfilling part-time position or looking to kickstart a full-time career in the food indus... Show more

 • Promoted

Start at 75 CPM, $1725 Per Week Guaranteed

K & B TransportationGresham, OR, USA
$1,725.00 weekly
Full-time

Road Warrior* Are you a Road Warrior? K&B Transportation is hiring for our Road Warrior fleet.Drivers on this option go out for 2 months at a time and then go home for ten days! Our Road Warr... Show more

TIG Welder I - Second Shift

AGC Heat TransferFairview, OR, United States
Full-time

Position Title: TIG Welder IReports To: Welding SupervisorFLSA Status: Non-ExemptCan you make the AGC Difference? AGC Heat Transfer, Inc.TIG Welder to join our second shift team in our Fairview, OR... Show more

 • Promoted

Senior Supervisor, Process Sustaining Engineering

Analog DevicesCamas, WA, United States
Full-time +2

About Analog DevicesAnalog Devices, Inc.NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge.ADI combines anal... Show more

 • Promoted

Shift Leader - SE Stark Street

Taco BellTroutdale, OR, United States
Full-time +1

Are you ready to lead a team, manage shifts, and develop your leadership skills while working alongside friendly colleagues in a fast-paced environment? Whether you're looking for a rewarding part-... Show more

 • Promoted

Maintenance Technician Manufactured Housing Community

Investment Property GroupBoring, OR, United States
Full-time

Who Are We?Investment Property Group is a private real estate investment and management firm headquartered in Park City, Utah, with additional offices in California, Minnesota, and Oregon.IPG owns ... Show more

 • Promoted

SHIFT LEADER

Dairy QueenTroutdale, OR, United States
Full-time

Job Opportunity At Dairy Queen.We strive to create positive memories for all our fans so we are looking for positive, energetic employees who are passionate about the Dairy Queen brand and deliveri... Show more

 • Promoted

Wafer Fab Operator - All shifts available

Analog DevicesCamas, WA, United States
Full-time +2

About Analog DevicesAnalog Devices, Inc.NASDAQ:ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge.ADI combines analo... Show more