Technician II - Fiber

Job Summary:

The Technician II - Fiber is responsible for all aspects, of Fiber including but not limited to installing, terminating, testing, and splicing.

General Job Duties and Responsibilities:

Cabling & Termination

• The Technician II - Fiber must have basic copper termination skills
• The Technician II - Fiber will install a work area outlet for the floor, modular furniture, and wall (terminate CAT 3 & CAT 5 jacks. Mount faceplates and surface mount boxes correctly. Adhere to IES COMMUNICATIONS labeling standards).
• The Technician II - Fiber will build closets (Mount and install backboards, cross-connects, racks, patch panels, fiber optic, and hardware). Install grounding for racks, equipment, and cable as required. Complete all IDC connections (. terminate 110/66 blocks and patch panels).
• The Technician II - Fiber performs testing, continuity test horizontal and riser cable, use of volt-ohmmeter, troubleshoot opens, crosses, shorts, and transpose pairs on horizontal and riser cable.
• The Technician II - Fiber installs LC, SC, ST, FC, FDDI, SMA, and MPO/MTP connectors, for both multi-mode & single-mode fiber
• The Technician II - Fiber will terminate simplex & duplex jumper cord
• The Technician II - Fiber will terminate & breakout outside plant (loose tube) fiber (. Corning/Commscope)
• The Technician II - Fiber will terminate & breakout outside plant (loose tube) fiber (. 3DNX)
• The Technician II - Fiber will terminate indoor tight buffered multimode and single-mode fiber
• The Technician II - Fiber will install fan-out kits including buffer tube
• The Technician II - Fiber will calculate the end-to-end loss budgets in accordance with TIA/EIA standards for multimode & single-mode fiber
• The Technician II - Fiber will fully complete all IES paperwork accurately and on time specifically, timesheets, material transfers, work orders, change orders, Job Blog, tool transfers and others as required
• The Technician II - Fiber will complete any other duties as assigned

Testing

• The Technician II - Fiber will test using an OTDR, Fluke DTX 180
• The Technician II - Fiber troubleshoots using an OTDR to identify and correct problems end to end, and Network-wide

Splicing

• The Technician II - Fiber will perform mechanical splicing with all types of fiber cable
• The Technician II - Fiber will perform fusion splicing with all types of fiber cable
• The Technician II - Fiber performs building entrance splices, maintenance space, and direct buried splices

Min

USD $24.00/Hr.
Max

USD $28.00/Hr.
Qualifications

Physical and Mental Requirements:

• The Technician II - Fiber must be self-motivated, positive in approach, professional, and help create, develop, and implement project process improvement(s).
• The Technician II - Fiber must promote the Company culture and mission to all employees, vendors, clients, and business partners.
• The Technician II - Fiber must possess and be proficient with the listed tools.
• The Technician II - Fiber must be able to act as the Company liaison for interface with customer representative(s).
• The Technician II - Fiber must possess proven problem-solving skills, critical thinking skills, and the ability to effectively read, write, and give oral presentation(s).
• The Technician II - Fiber must be able to work at heights, off of a ladder, and in confined spaces, lift up to 50 pounds and move up to 75 pounds.
• Must be able to stand and walk very large job sites regularly.
• The Technician II - Fiber must be able to see and distinguish different colors, read the small print, and hear and recognize audible signals such as dial tones.
• The Technician II - Fiber must be able to travel within the branch territory and/or regional territory as needed.
• Regular attendance is mandatory

Education, Certification, License, and Skill Requirements:

• Must possess a High School diploma or GED equivalent
• Must possess and be proficient with the listed tools.
• Must be proficient at terminating all connector types and methods for SMF and MMF systems (Unicam, anaerobic, heat-cure)
• Must have Testing & Troubleshooting MMF & SMF systems experience (OTDR & PMLS)
• Must be able to meet IES driving standards policy
• Prefer 5-7 years of experience in Fiber
• Prefer Industry Certifications (Corning/FOA)
• Prefer Data Center installation experience
• Prefer Mechanical and Fusion Splice experience
• Prefer OSP / Confined Space Entry experience (splicing)
• Must be able to use the following trade Tools: Screwdriver (regular and Phillips), drywall saw, torpedo level, tape measure, snips (with belt sheath), pliers (needle nose and channel locks), hammer, wrench set, cable stripper, flashlight and gloves. Punch tool with 110 block and 66 block blade, 6/8 position combo crimp tool, and Krone/3M/BIX.

Minimum Years of Experience

0-2
License Required

No
Minimum Education

High School
Overview

IES is a national provider of industrial products and infrastructure services to a variety of end markets, including electrical, mechanical and communications contracting solutions for the commercial, industrial, residential and renewable energy markets. IES is publicly traded on NASDAQ under the symbol IESC. As of the end of IES’s 2024 fiscal year ending September 30, 2024, IES produced over $2.8+ billion in revenue and employed over 9,485 employees at over 131 domestic locations across the United States. IES is an Equal Employment Opportunity Employer: Minorities, Females, Gender Identity, Sexual Orientation, Individuals with Disabilities, Protected Veterans Encouraged to Apply